Fs 3 1 0 Mm
adminApril 25 2021
Fs 3 1 0 Mm
- 3.0 out of 5 stars Fickle to set up but a good cheap solution. Reviewed in the United States on October 16, 2009. Verified Purchase. I bought the VuPoint to scan.
- This is a 12mm threaded 3.6mm lens that will fit the Lumenier CS-600 Super, CU-690 Ultra and most other common CCD cameras. This lens will give you an approximately 90 degree field of view (as opposed to the approximately 115 degree field of view from.
(3) 3 product ratings. Seiko Presage Cocktail Negroni Red Dial Automatic 38.5 mm SS Watch - SRPE41J1. Trending at $368.49. Authorized Seller. FSS-100: 1.0' 25: 0.750' 19: 0.750' 19: 1.125' 29: 1.375' 35: 0.625' 16: 4.000' 102: FSS-150: 1.5' 38: 1.188' 30: 1.188' 30: 1.688' 43: 1.750' 44: 0.563. Search results for FS deactivated at Sigma-Aldrich. Compare Products: Select up to 4 products.Please select more than one item to compare.
sponsored by: Dia Foto Film Scannen www.archivscan.ch
Formulas for converting DPI - PPI, mm - cm - inches and pixels
Calculation of length or width, pixels and DPI with the following specifications:
| Image: | 3266×2449 Pixel (8Mpx, 4:3) |
| Print size: | 277 × 207 mm |
| Pixel density: | 300dpi |
With these formulas you can convert the length, pixels and DPI / PPI:
pixel = dpi * mm / 25.4 mm (1 in)
Bytes = pixel * color depth / 8 bit (1 Byte)
Examples: print resolution, scan resolution and image size in practice
I want to print a picture for the photo album, 13 x 18 cm, with good quality. How big does the resolution have to be in pixels?
A good quality picture for a photo album is printed at 300 dpi. To calculate the resolution in megapixels, multiply the number of pixels of length and width and divide them by mega (1 million).
pixel x = 300 dpi * 13 mm / 25.4 mm = 1535 pixel
pixel y = 300 dpi * 18 mm / 25.4 mm = 2126 pixel
resolution = 1535 px * 2126 px / 1`000`000 = 3.3 Mpx
I have an image with 3264 x 2448 pixels and would like to print it as a poster. How big can I print the poster?
In contrast to a small picture in the photo album, the poster does not have to have a high pixel density, as this is viewed from a greater distance and the pixels become smaller for the eye. Approx. 100 dpi is recommended for a poster.
length = 3264 px * 2.54 cm / 100 dpi = 83 cm
width = 2448 px * 2.54 cm / 100 dpi = 62 cm
I would like to scan slides and present them with a slide show on the television. Screen TV 40 inches; Resolution: 1,920 x 1,080 pixels. How big does the scan resolution have to be?
The dimensions of a slide are 36 x 24 mm, so the aspect ratio does not match that of the television (television = 16: 9 slide = 3: 2). We only calculate the pixel density of the height of the image, as this is the limiting measure.
dpi = 1080 px * 25.4 mm / 24 mm = 1143 dpi
Resulting image size horizontally in the correct aspect ratio:
pixel = 1143 dpi * 36 mm / 25.4 mm = 1620 pixel
I would like to print a poster of 900 x 600 mm with the maximum resolution from a slide. How good will the quality be in 'dpi'?
The maximum resolution of the scanner is 4000dpi, a slide has the dimensions of 36 x 24 mm. After you have calculated the number of pixels, you can use the dimensions of the poster to calculate the pixel density.
pixel = 4000 dpi * 36 mm / 25.4 mm = 5669 pixel
dpi = 5669 px * 25.4 mm / 900 mm = 160 dpi
Units
| engl. unit of length | 1 Inch = 25.4 mm |
| dots per inch | 1 dpi = 1 Dot per Inche(25.4 mm) |
| pixel per inch | 1 ppi = 1 Pixel per Inch(25.4 mm) |
| digital unit of measurement | B = Byte 1 bit = 0 1 1 B = 8 bit 1 kB = 1024 B 1 MB = 1024 kB |
The one piece FS adapter, essentially a reducing ferrule, is recommended for use in fittings where the ferrule will not be removed. Connections are made and disconnected by loosening the fitting nut and sliding the tube out.
One piece fused silica adapters are available in Valcon polyimide and virgin polyimide for use up to 350°C and in PEEK for lower temperature applications (up to 175°C).
Valcon polyimide is a unique graphite-reinforced composite, specially prepared to maximize mechanical stability at high temperatures. Small blocks are subjected to extreme loads by a process known as hot isostatic pressing, with individual ferrules subsequently machined from these blocks. The result of this two-step process is a fused silica adapter with high temperature stability which far exceeds that of parts produced by conventional molding.
Note: The determining factor in selecting an adapter is the fused silica tubing's outer diameter, or OD.
1/32' PEEK one-piece FS adapters - package of 5
Properties: good chemical resistance and mechanical properties at slightly elevated temperatures
| FS tubing OD | Product No. |
|---|---|
| 0.36 ≤ 0.40 mm | FS.4PK-5 |
| 0.40 ≤ 0.50 mm | FS.5PK-5 |
| 0.50 ≤ 0.80 mm | ZF.5PK-5 |
1/32' Valcon polyimide one-piece FS adapters - package of 5
Properties: high temp, graphite reinforced
| FS tubing OD | Product No. |
|---|---|
| 0.20 ≤ 0.25 mm | FS.25-5 |
| 0.25 ≤ 0.36 mm | FS.36-5 |
| 0.36 ≤ 0.40 mm | FS.4-5 |
| 0.40 ≤ 0.50 mm | FS.5-5 |
| 0.50 ≤ 0.80 mm | ZF.5V-5 |
1/16' Valcon polyimide one-piece FS adapters - package of 5
Fs 3 1 0 Mm X
Properties: high temp, graphite reinforced
Fs 3 1 0 Mm 2
| FS tubing OD | Product No. |
|---|---|
| < 0.20 mm | FS1.2-5 |
| 0.20 ≤ 0.25 mm | FS1.25-5 |
| 0.25 ≤ 0.30 mm | FS1.3-5 |
| 0.30 ≤ 0.40 mm | FS1.4-5 |
| 0.40 ≤ 0.50 mm | FS1.5-5 |
| 0.50 ≤ 0.80 mm | FS1.8-5 |
| 0.80 ≤ 0.90 mm | FS1.9-5 |
| 0.90 ≤ 1.0 mm | FS11.0-5 |
1/16' virgin polyimide one-piece FS adapters - package of 5
Properties: high temp, electrical insulator
| FS tubing OD | Product No. |
|---|---|
| 0.90 ≤ 1.0 mm | FS11.0V1-5 |
3 1 Pizza
Other sizes are available on special order.
Fs 3 1 0 Mm